Drive not ready.

There are many messages that computer users dread seeing on the screen. Surely "drive not ready" is potentially one of the most disastrous. There are many possible reasons that you could see this script. It could signal that perhaps you have added hardware that has caused system instability. Perhaps physical damage has occurred to your drive. It could even be a simple software problem. Whatever the reason, the best advice you can get is don't do anything else until an expert has seen your drive. However, if you are determined to try and solve your problems without expert help, the first thing to do is check the hardware settings of all your drives. Sometimes incompatibility between software programs and operating systems can cause this message to be displayed. Assuming that you can still get internet access, you might try searching forums concerning the software you're using for similar problems. Nearly every type of software in use has some type of forum for users on the Internet. Error Message for Which Drive? If you get the error message when trying to use a floppy or CD drive, then there could be a problem with the drive itself, or with the disk. In either case, the first step would be to try the drive with a different disk to see if the problem reoccurs. If it does, you have a drive problem and may need professional help. If it turns out that you are receiving the "drive not ready" message because your drive has sustained damage, the advice is as mentioned in the first paragraph; do absolutely nothing until you get help. If you try to access the drive you may be causing further damage.

Get a Free Data Recovery Service Quote here. .